收藏本站
LF Series q this catalog is reference only. Please
The product information Miniature Waterproof Shielded Connectors request the Engineering Drawing for the most current and accurate design information.
No.
Illustration
Operation
5
5
Forming cavity
Crimping tool
5
Both sides of the shielding clamp must be
placed in the forming cavity of the tool
(as shown on the illustration) and crimped
over the cable by closing the tool completely.
Crimping tool Forming cavity
Applicable cable
diameter
Shielding clamp
diameter after crimping
HR10A-TC-02
LF-TC-01
5.3
7.0
7.9
9.1
5mm
–––
7.3mm
8.7mm
5.3mm to
5.5mm
–––
7.9mm to
8.1mm
9.1mm to
9.3mm
6
1
,
2
Threaded section
Backshell
Connector Assembly
1 Place the body/insulator assembly in the
applicable solder termination fixture.
For plug assembly
Fixture Part No.
LF07BP-T01
LF10BP-T01
LF13BP-T01
For jack assembly
Fixture Part No.
LF07BJ-T01
LF10BJ-T01
LF13BJ-T01
Applicable connector
LF07WBP-6S,6P,3S,3P
LF10WBP-4S,4P,12S,12P
LF13WBP-20S,20P,11S,11P
Applicable connector
LF07WBJ-6S,6P,3S,3P
LF10WBJ-4S,4P,12S,12P
LF13WBJ-20S,20P,11S,11P
Wrench width : D
2
Coat the thread section of the body/insulator
assembly with Loctite 271 compound
Table 6 (Recommend tightening torgue)
Shell size Tightening torque Wrench width
LF07 1N·m~1.5N·m 10mm
LF10 1N·m~1.5N·m 13mm
(manufactured by Henckel Japan, Ltd.) or
equivalent, tightening it with a torque
specified in the table 6.
Note
It is critical that the cable itself will not turn or
LF13
1.5N·m~2N·m
16mm
twist during this operation.
It may cause breakage at the soldered area.
3
,
4
Seal bushing
3
Slide forward the seal bushing and insert it in
the backshell until fully seated.
Strain relief collar
4
Slide forward the strain relief collar and insert
it in the backshell, making sure that the
opposing protrusions fit inside the
corresponding grooves, as shown on the
illustration.
Groove
Protrusion
Tightening collar
Note
It is critical that the protrusions are inside the
corresponding grooves.
It may cause breakage, when a tightening collar is assembled.
5
Threaded section
Tightening collar
5
Verify that the Locktite 7649 primer
(or equivalent) on the threaded sections of the
backshell and tightening collar are dry.
Apply the Locktite 271 compound to the
tightening collar’s threaded section and attach
it to the backshell.
12
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LP-50 RCA COAX LOOPING PLUG 50 OHM
LPH-50 COAX LOOPING PLUG HI FREQ & PWR
LPL-50 RCA COAX LOOP PLUG 50 OHM
LPMWHF MINI WECO LOOPING PLUG HI FREQ
LPTW-124 TWINAX LOOPING PLUG 124 OHM
LPTWM-78 MINI TWINAX LOOPING PLUG 78 OHM
LPTWM2TP-78 MINI TWINAX LOOP PLUG 78OHM 2PTS
LPW-75 STD WECO LOOPING PLUG 75 OHM
相关代理商/技术参数
LF13-WBP-20S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13WBP-20S 功能描述:标准环形连接器 20P PLUG SHELL SZ 13 FEM AU TERM IP67 RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值:
LF13-WBP-3P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-3S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-4P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-4S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-6P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-6S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors